Profile and groove
Share the aluminium or uPVC profile, groove dimensions or an existing system reference.
TILT & TURN WINDOW SYSTEMS
Select hardware for a tilt and turn window system
Start with the combined tilt and turn opening direction, then confirm the material, profile interface and sash weight before comparing the JNPX range.
SYSTEM SELECTIONFamily → condition → modelStart with the closest system direction
MODEL STARTING POINTS
Compare the available tilt and turn direction
These existing product pages are starting references. Final suitability depends on the actual profile, groove, sash weight and configuration.
01
MODEL REFERENCE
JNPX400
Aluminium tilt and turn reference with a standard rod configuration.
View JNPX400 ↗
02
MODEL REFERENCE
JNPX700
Aluminium tilt and turn reference for a longer rod configuration.
View JNPX700 ↗
03
MODEL REFERENCE
JNPX800
Aluminium tilt and turn reference with a long tie-rod drawing page.
View JNPX800 ↗
04
UPVC ROUTE
uPVC tilt and turn route
For uPVC systems, continue to the category and compare the profile and opening references there.
View uPVC tilt & turn ↗BEFORE MODEL SELECTION
Confirm these conditions first
A tilt and turn label alone does not confirm compatibility. Use the profile and operating information together.
Sash dimensions and weight
Provide sash width, height and known sash weight for the relevant opening condition.
Handing and finish
Confirm left or right handing and the required finish or colour where applicable.
Model or drawing
Use the model page, drawing, product photo or installation detail as the review starting point.
CONTINUE
Related window routes
Move to the closest alternative when the opening direction or material is different.
TILT & TURN MATCHING
Send the profile information for review
Include the profile section, groove, sash size, weight, handing, finish, quantity and destination where available.
- Product or system direction
- Profile, drawing, photo or model
- Quantity, destination and timing